20/07/2009 11:58:32 LeeFry Posts: 31

HAL interface with other systems (Alarms/Fire etc) There are terminals as standard on the HAL circuit board which (if a signal is sent from the intruder of fire panel) will bring all connected lighting circuits to FULL - this is the HAL panic facility is indicated on control plates by ALL LEDs being fully illuminated. This feature effectively gives an additional (5th scene) - this could be used in some applications as a 'cleaners' switch, bringing all lighting circuits to full-on and aiding vision. -- Lee Fry Forum Administrator lee[at]focus-sb[dot]co[dot]uk

permalink